 |
Typical Properties
| Item | Specifications | Results |
| Appearance | White flake | White flake |
| Total Anhydride Content | ≥97.0 | 98.33 |
| Acid Value (mg KOH/g ) | ≥873.00 | 874.14 |
| Melting Point ℃ | ≥164.0 | 165 |
| Molten color (pt-co) | ≤120 | 110 |
| PA content（ppm） | ≤300 | <300 |
Chemical Properties
White powder or flakes. Melting point 168 ℃. Soluble in water and ethanol, acetone and other general organic solvents.
Usage
(1)Used for making unsaturated polyester resin, polyimide resin, PVC heat resistant plasticizer, epoxy resin curing agent, dye, capacitor impregnating oil and adhesive, etc
(2)Used for making polyester resin, polyimide resin, high temperature insulation material, PVC plasticizer, etc
Packaging and Shipping
Packing: 25kg/bag by sea or by air
Storage
Warehouse ventilation and low temperature drying
Typical Properties
| Item | Specifications | Results |
| Appearance | White flake | White flake |
| Total Anhydride Content | ≥97.0 | 98.33 |
| Acid Value (mg KOH/g ) | ≥873.00 | 874.14 |
| Melting Point ℃ | ≥164.0 | 165 |
| Molten color (pt-co) | ≤120 | 110 |
| PA content（ppm） | ≤300 | <300 |
Chemical Properties
White powder or flakes. Melting point 168 ℃. Soluble in water and ethanol, acetone and other general organic solvents.
Usage
(1)Used for making unsaturated polyester resin, polyimide resin, PVC heat resistant plasticizer, epoxy resin curing agent, dye, capacitor impregnating oil and adhesive, etc
(2)Used for making polyester resin, polyimide resin, high temperature insulation material, PVC plasticizer, etc
Packaging and Shipping
Packing: 25kg/bag by sea or by air
Storage
Warehouse ventilation and low temperature drying
